Problems that should be paid attention to in the use of high-frequency machines
1. Strictly follow the operating requirements. You must water the water first when starting up, check the waterway for no abnormalities, and then start the machine and equipment; the opposite is true when shutting down.
2. Different industries have different pertinence:
(1) Thermal deformation industry:
A: The customer should pay attention to the maintenance of the equipment and remove the dust and oil in time.
B: Pay attention to the use of cooling water source, the offshore salinity is relatively high, and it is easy to produce scale and block the waterway
(2) Heat treatment industry:
A: Remove the oil stains on the equipment in time.
B: Pay attention to the use of water source, the water quality is not good, it is easy to produce scale and block the waterway, resulting in poor heat dissipation and damage to the equipment.
3. Common problems: Pay attention to the matching of sensors. For sensors made by customers, the inductance and the distance between the coil turns will affect the heating speed and the life of the equipment.
Tube Mill Machine Line=>Cold Rolling Mill=>Tube Mill Components
